Rolled rebar in coils

Rolled rebar in coils

Reinforcing bars
Ribbed welded rebar in coils Ribbed welded rebar in coils
ORDER
Range:
Ø 8; 9; 10; 11, 12; 14; 16 mm
Steel grade:
B500B
Standard:
SRPS EN 10080-2008
Material Safety Data Sheets:
Download

Steel grade
 Механические свойства, не менее
Yield strength , N/mm
 Tensile strength , N/mm
 Relative elongation , %
 Contraction , %
08
 196
 320
 33
 60
10
 205
 330
 31
 55
15
 225
 370
 27
 55
20
 245
 410
 25
 55
25
 275
 450
 23
 50
30
 295
 490
 21
 50
35
 315
 530
 20
 45
40
 335
 570
 19
 45
45
 355
 600
 16
 40

Note - As agreed between the manufacturer and the customer for steel from steel grades 25, 30, 35, 40, allowed reduction of tensile strength of 20 N/mm, compared with the standards set out in the table, while improving the rules elongation of 2% (abs ).

In coils with single banding by steel strap 0,8-1,0х32 mm or by wire rod 8.0 mm in 4 places min. equally distributed over coil. Outer diameter of a coil –1300 mm max., inner diameter – 820 mm min.

Option 1 – coil weight 1400-1800 kg.
Option 2 – coil weight 1800-2500 kg.

Other constructions

Ø 6,0; 8,0; 10,0; 12,0; 16,0 mm

St3sp, chemical composition acc. to GOST 5781-82, rev. 1-5

Ø 10M

400W

Ø 6,0; 8,0; 10,0; 12,0; 14; 16,0; 20,0 mm

St3sp, chemical composition acc. to STB 1704-2012

Ø 8,0; 10,0; 12,0 mm

S400W

Ø 6-14 mm

chemical composition acc. to STB 1704-2012

Ø 6-14 mm

St3sp with increased content of silicon (up to 0.50 %) and manganese (up to 1.30 %)

Ø 6-14 mm

St3sp with increased content of silicon (up to 0.50 %) and manganese (up to 1.30 %)