Wave steel fiber

Wave steel fiber


Wave steel fiber Wave steel fiber
ORDER
L (length):
mm
Range:
0,20; 0,25; 0,30; 0,35; 0.40
Steel grade:
65 - 90
Standard:
TU BY 400074854.628-2011 Rev. № 1, 2; TU 14-1-5564-2008 Rev. № 1, 2, 3, 4; DIN EN 14889-1:2006
Material Safety Data Sheets:
Download

Фибра волновая

Parameters
Values and their deviations
Length L, (mm) 15,0±1,0   18,0±1,0 22,0±1,5
Nominal diameter D, (mm) +0,02
0,20
-0,01
+0,02
0,25
-0,01
+0,02
0,30
-0,02
+0,03
0,35
-0,02
+0,05
0,40
-0,03
+0,05
0,50
-0,04
+0,05
0,60
-0,04
+0,05
0,70
-0,04
Length of ends C, (mm) 1,1±0,6
Height of anchor deviation, h (mm) 4,5±1,0 5,0±1,0 5,5±1,0
length of the middle section i, (mm)       0,7±0,3    
Fiber index, L/D 75±11 60±9 50±8 43±6 38±6 36±5 30±5 31±5

The fiber is packed to cardboard boxes made of multi-layer cardboard as per state standard 7376 having overall dimensions 247х247х270 мм, 160х335х485 mm. The net mass of one packing unit – in coordination with the consumer, but not exceed 25 kg. Deviation from the net mass of the fiber mentioned in the packing unit must not exceed ±1%. Packaging to boxes having the dimensions of 247х247х270 mm is performed in the following way:

  • Boxes with fibers are placed to a polyethylene bag as per state standard 10354 in four layers according to a 3х4х4 scheme.
  • The polyethylene bag is located in a box made of corrugated cardboard as per state standard 7376, which consists of a shell having dimensions 1060х800х660 mm, the base having overall dimensions 1075х810х110 mm and a cover having overall dimensions 1075х820х540 mm.
  • Boxes are mounted onto a wooden pallet having overall dimensions 1080х820х166 mm. Cardboard boxes are fixed to a wooden pallet by means of a polypropylene or polyester tape. Packaging to boxes having the dimensions of 160х335х485 mm is performed in the following way:
  • Boxes with fibers are placed on a wooden pallet having overall dimensions 1080х820х166 mm in nine layers according to 5х9 scheme.
  • Cardboard boxes and the wooden pallet are wrapped with polyethylene as per state standard 10354. Use of a sticky film is supposed.

Steel fibers must be stored in packages, in dry premises. Terms of fiber storage and transportation, as far as impact of environmental climatic factors is concerned, according to term 1 of the state standard 15150.
The fibers are supplied as per ту by 400074854.628-2009 (Belarus) and TU 14-1-5564-2008 (Russian Federation).

Product catalogue
PDF - 4 Mb
Rolled products catalogue
PDF - 3,6 Mb
Pipe products catalogue
PDF - 5,58 Mb
Steel cord and wire production catalogue
PDF - 2,90 Mb
BMC holding product catalog
PDF - 1,15 Mb